Pole and Base System

J-HOOK CHANDELIER ADAPTER

$195.00
+Shipping

Already Sold: 0 Available: 0
J-HOOK CHANDELIER ADAPTER , ,

COMING SOON!   J-Hook adapter works with our pole and base system and allows you to hang a Chandelier or hanging light Available in silver.  Pole and base not included. Can be wired with lamp cord with detachable connections for hiding wire (not included) Hole will need to be drilled into pole upright. Not included. […]

Learn More

$195.00
+Shipping

  • Availability: in stock
12%OFF
LEVI-LIER FREE STANDING CHANDELIER STAND

$1,299.00 $1,140.00
+Shipping

Already Sold: 0 Available: 0
LEVI-LIER FREE STANDING CHANDELIER STAND , ,

COMING SOON! “Levitate” a Chandelier over a table with our Levi-Lier Chandelier Stand Mount to a B&R Block or Stake into ground. Available in Black or White Breaks down to 3 pieces for easy transportation Can be wired with lamp cord with detachable connections for hiding wire (not included) 25lb Chandelier capacity (chandelier not included)

Learn More

$1,299.00 $1,140.00
+Shipping

  • Availability: in stock
29%OFF
Lighting Cantilever Bracket

$69.95 $49.99
+Shipping

Already Sold: 5 Available: 5
Lighting Cantilever Bracket , , ,

Lighting Cantilever Bracket can attach to any round pipe or truss 1.5″ to 2″ and allow to hang a light or chandelier from the pole.  Great for High Peak Frame Tents where there is not a center point to hang a light fixture.  

Learn More

$69.95 $49.99
+Shipping

  • Availability: in stock
Already Sold: 216 Available: 34
Pole Base 8 (Block Mount Only)

Pole Base 8 is a plate that gets bolted to your Block and Roll Blocks with the included U-Bolt. This will allow you to use your blocks with our Pole and Base System. Simply choose the block size based on the amount of weight needed. Includes: 1- 1/2″ U-Bolt, 2- 1/2″ nuts and 2- 1/2″ […]

Learn More

$129.00
+Shipping

  • Availability: in stock
Already Sold: 42 Available: 20
Pole Base 20 (50lb Freestanding Post Base)

Pole Base 20 is a 50lb fee standing pole base. This can also be mounted to a Block and Roll Block (hardware included) or staked (stakes not included) into the ground for added weight. This plate can also accept a 12″x12″ box truss using 4 1/2″ bolts (not included) Tom Cat/Applied. Please check your truss […]

Learn More

$259.00
+Shipping

  • Availability: in stock
“L” Pole (Banner Pole)

Our “L” pole attaches to our pole and base system to hang banners or signs. Will raise pole by 24″ and accept a 34″ banner. Add pocket to your banner or attach with cable ties if it has grommets. Must use appropriate ballast. Dimensions: 32″ x34″ with insert steel with silver powdercoating

Learn More

$99.00
+Shipping

  • Availability: in stock
Clamp on Banner pole

$54.00
+Shipping

Clamp on Banner pole

Add this to your pole and base to hang a banner or use as a lower pole in conjunction with our L-Pole. 2″ Clamp 34″ Pole

Learn More

$54.00
+Shipping

  • Availability: in stock
String Light Pole Adapter 24″

String Light Pole attachment with eye. This 24″ attachment will allow for attaching string lights to our pole and base system. This will increase pole by 24″ Use appropriate ballast when attaching string lights. Dimensions: 1.90 OD x 34″ (with insert and eye)

Learn More

$75.00
+Shipping

  • Availability: in stock
String Light Pole Adapter 48″

String Light Pole attachment with eye. This 48″ attachment will allow for attaching string lights to our Pole and Base System. This will increase pole by 48″ raising an 8’ pole to 12’.  Reduce string light lengths when using higher poles. Use appropriate ballast when attaching string lights. Dimensions: 1.90 OD x 58″ (with insert […]

Learn More

$85.00
+Shipping

  • Availability: in stock
24″ Extension Pole Attachment

Add this to your pole and base poles to raise 24”. All other attachments and adapters will fit the extension pole.

Dimensions:
1.90 OD x 33″ with insert.

Learn More

$65.00
+Shipping

  • Availability: in stock
8′ Pole

$95.00
+Shipping

8′ Pole

8′ Steel Pole for Pole and Base System. 4 way holes for easy positioning on our pole bases. Dimensions: 1.90 OD x 95″ long steel with silver powdercoating.

Learn More

$95.00
+Shipping

  • Availability: in stock
6′ Pole

$89.00
+Shipping

6′ Pole

6′ Steel Pole for Pole and Base System. 4 way holes for easy positioning on our pole bases. Dimensions: 1.90 OD x 71″ long steel with silver or brown powdercoating.

Learn More

$89.00
+Shipping

  • Availability: in stock
5%OFF
Already Sold: 12 Available: -1
Dual Propane Tank/Cylinder Block Mount Kit , , , ,

Available Late January 2020 Bracket holds up to 2 –  100lb Propane tanks, but can adjust down to hold smaller tanks. Add this Propane Tank/Cylinder Bracket kit to any Block And Roll® Block to safely store tanks and keep them from tipping over on hard surfaces that can’t  be penetrated with a stake. Bracket can […]

Learn More

$317.00 $299.99
+Shipping

  • Availability: in stock
Lighting T-Bar Adapter

$139.00
+Shipping

Already Sold: 13 Available: 10
Lighting T-Bar Adapter

T-Bar Adapter gives you a 48″ horizontal pole at the top of your Pole and Base System. Great for lights or radiant heaters. Adds 3″ to top of pole and is 48″ wide.

Learn More

$139.00
+Shipping

  • Availability: in stock
Already Sold: 6 Available: 4
Dual Propane Tank/Cylinder Bracket (Post Mount Bracket Only) , , , ,

Add this Propane Tank/Cylinder Bracket to any 2″ post or our Pole and Base System components to safely store tanks and keep them from tipping over.  Add block post mount, 48″ post and Block And Roll® Block for free standing applications where ground penetration is not allowed/ Bracket attaches to any 2″ post.  This listing […]

Learn More

$129.00
+Shipping

  • Availability: in stock
Already Sold: 33 Available: 37
Outdoor Dining / Tent Electric Radiant Heater ***In Stock*** , , , , , ,

The  heavy-duty Wall Mounted Infrared Patio Heater introduces a new revolution in outdoor heating. Operating at 90% heating efficiency, this infrared patio heater runs on regular household electric current and is substantially less expensive to operate than propane patio heaters. This adaptable unit can be used indoors and outdoors and comes with a movable mounting […]

Learn More

$269.99
Free US Cont. Shipping

  • Availability: in stock
Pole Base 20B (Black Pipe Base)

Pole Base 20B with 1-1/2″ black pipe adapter is a free standing pole base. This can also be mounted to a Block and Roll Block (hardware included) or staked (stakes not included) into the ground for added weight. Treaded hole to accept standard 1-1/2″ black pipe. This plate can also accept a 12″x12″ box truss […]

Learn More

$259.00
+Shipping

  • Availability: in stock
Pole Base 8B (Black Pipe Block Mount)

Pole Base 8B is a plate that mounts to a standard Block and Roll Block and can accept a standard 1-1/2″ black pipe. Includes 1 – 1/2″ U-Bolt, 2- 1/2″ Nuts and Washers. Dimensions: 8x8x1″ steel with black coating.

Learn More

$129.00
+Shipping

  • Availability: in stock
48″ Fan Pole

$99.00
+Shipping

48″ Fan Pole

Add this 48″ Fan Pole to your existing pole and base system to create standing Fans. Will work with most fans. Sample picture shown with 24″ fan. (fan and base not included) Use our Trac-Clamps for mounting fans directly to Keder Beams. Get more use out of your pole and base system and existing fans […]

Learn More

$99.00
+Shipping

  • Availability: in stock
Sign Post Block Mount

$99.00
+Shipping

Sign Post Block Mount ,

Our Sign Post Block Mount bolts on top of our standard blocks or sign block for attaching standard “U” channel sign post. Use this for stop signs, directional signs, etc… Post mount only, Block , sign and post not included.

Learn More

$99.00
+Shipping

  • Availability: in stock
4 Block Truss/Post Mount

$579.00
+Shipping

4 Block Truss/Post Mount , ,

Join 4 blocks together with this Truss/Post mount to create truss towers or post towers. Hole patterns for 12×12 and 20.5×20.5 truss. Custom posts available. Works with 350-700lb blocks. Shown with optional 4 block Level plate.

Learn More

$579.00
+Shipping

  • Availability: in stock
4 Block Level Plate

$649.00
+Shipping

4 Block Level Plate , ,

The 4 Block Level Plate is designed to work with our 4 Block Truss/Post Mount to level the blocks on uneven ground. Includes 4 Screw Jacks.   This item requires to be shipped VIA Freight Carrier and is not eligible for the Free shipping Promotion.

Learn More

$649.00
+Shipping

  • Availability: in stock
Out of stock
Tiki Umbrella Adapter

$475.00
+Shipping

Already Sold: 0 Available: 0
Tiki Umbrella Adapter

Add the Tiki Umbrella adapter to a 6′ pole mounted to a block and now you have a free standing Tiki Umbrella. Just add Thatch Cover (not included). Adds 15″ to top of pole. 77-80″ wide. **Special Order**

Learn More

$475.00
+Shipping

  • Availability: out of stock
Pole Table Mount

$79.00
+Shipping

Pole Table Mount

Add a table to your Pole and Base System. Great for making use of our String Light Pole Adapters or Tiki Umbrella system. Table top not included. 36″ max table recommended. Fits 1.5″-2″ pipe     Aluminum Construction Mill Finish Dimensions: 8″x8″x2.5″

Learn More

$79.00
+Shipping

  • Availability: in stock
Pole and Base Cart 8

$659.00
+Shipping

Pole and Base Cart 8 ,

Pole and Base Cart 8 holds 8 20×20 50lb base plates and 8 accessories. Handle is removable for storage when not in use. Easy roll casters, steel construction, black powder coated finish. Base plates or accessories not included.

Learn More

$659.00
+Shipping

  • Availability: in stock
36″ Umbrella Pole

$89.00
+Shipping

36″ Umbrella Pole

Add this 36″ Umbrella Pole to your existing pole and base system to create free standing wind resistant umbrella bases.  Use with our Hand Sanitizing Brackets to create an outdoor sanitizing station. Dimensions: 1.90 OD x 36.5″ long steel with silver powder coating. Pole only.  includes tension screw for base and 2 tension screws for […]

Learn More

$89.00
+Shipping

  • Availability: in stock
8%OFF
Already Sold: 0 Available: 5
Red Square 7′ Market Umbrella with “HAND SANITZER” print on 4 sides , ,

Red Square 7′ Market Umbrella with “HAND SANITZER” print on 4 sides Aluminum 7 ft x4 panel square personalized market umbrella casts a spell on any onlooker with its appealing frame. This market umbrella features a 7 ft aluminum frame with wood grain appearance, 4 frame configuration, polyester vented cover, and manual function. A 5″x34″Hand […]

Learn More

$249.00 $229.00
+Shipping

  • Availability: in stock
Sale!
Outdoor Wind Resistant Hand Sanitizing Station (350lb Base)

$799.00$1,179.00
Requires Freight Shipping

Outdoor Wind Resistant Hand Sanitizing Station (350lb Base) , , , ,

Complete Outdoor Wind Resistant Hand Sanitizing station. Unit includes 350lb concrete base, vinyl base cover, pole mount with umbrella pole, 1-4 sanitizer dispensers with brackets, 7′ Red “Hand Sanitizer” market umbrella. Designed for outdoor locations. Perfect for high volume office buildings, sporting venues, concert halls and outdoor events. Can be moved quickly without dismantle with […]

Learn More

$799.00$1,179.00
Requires Freight Shipping

  • Availability: in stock
Already Sold: 0 Available: 30
Single Hand Sanitizer Mount (Bracket only) , ,

Single Hand Sanitizer Dispenser mount  for use with our Pole and base system  or  counter install. (additional hardware required) Add a hand sanitizer to our pole and base system along with our Pole Table Mount Bracket (not included)   add up to hand sanitizer brackets Single unit only. Dispenser not included. Has space for 11″x11″ graphic.  […]

Learn More

$59.99
+Shipping

  • Availability: in stock

Want Free Shipping?

Place an order of $100 or more to qualify for Free Shipping in the continental US.

This offer applies to website orders only.
Freight items excluded.