B&R’s T-Deck puller adapter is a back saver for your installation crew. Use to pull flooring decks into place without bending over.
Dimensions: 20.50″
Total measurement when inserted to T-Deck tool: 48.5″
Pull tip: 6″ long
Pull tip: 3/8″ diameter
Use with our T-Deck Tool Stand Up Flooring Tool
California Prop 65 | WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
$44.99
+Shipping
COMMING SOON! Replacement Socket Adapter with 1/2″ drive (T-Deck tool not included) includes bail pin.
Learn More
$14.99
+Shipping
Socket Bit for 1/2″ drive T-Deck Tool. 3/16″
Learn More
$14.99
+Shipping
Socket Bit for 1/2″ drive T-Deck Tool. 1/4″
Learn More
$32.95
+Shipping
Flat Blade Key Adapter for T-Deck Tool Blade is 2.5″ wide and 3/16″ thick with relief in the middle. Includes spring pin for storing on T-deck tool. T-Deck Tool not included.
Learn More
$14.99
+Shipping
Socket Bit for 1/2″ drive T-Deck Tool. 5/16″
Learn More
$139.00
+Shipping
B&R’s T-Deck Tool is a back saver for your installation crew. Includes 1/2″ drive socket adapter. (BITS SOLD SEPARATELY) Socket bits can store in the main shaft along with the 1/2″ drive adapter. Socket bits are field replaceable from most hardware stores. Choose between a variety of bits for all different kinds of flooring locks. […]
Learn More
$44.99 $39.99
+Shipping
One piece Socket Bit T-Deck Tool. 5/16″. This is not compatible with our 1/2″ socket drive. Includes pin.
Learn More
$3,395.00
Includes shipping to Continental US only
The fastest, easiest, multi-use mixer on the market. Featuring a fully-adjustable water input designed to be used with concrete, mortar, or stucco mix – it quickly and effortlessly provides reliable consistency wherever it’s needed. The Mud Mixer is the easiest way to make Block And Roll® Blocks. Whether you are filling one form or 20, just keep adding bags of mix for constant mud output.
For use with Block And Roll® Block Forms, BRMM Riser kit must be installed while assembling Mud Mixer. Raises unit 6” (included Free)
Learn More
$13.95
+Shipping
The Block and Roll 2 Block Strap Adapter connects directly to the Block and Roll blocks with easy-to-use snap hooks. Then connect your Tent strap to the sliding hook. Perfect for up to 2 – 700lb Blocks (Tent Strap not included) Use with our 1.5″ Tent Strap or our 2″ Tent Strap Total WLL […]
Learn More
$44.99
+Shipping
The E-track linen hanger is designed for hangers to be hooked to the cross bar. With this great design, you can hang just about anything you can think of. The bracket has been weight tested to hold 300 lbs; more than enough to hold your apparel or linens. Designed to hold the heaviest of linens, […]
Learn More
$329.00
+Shipping
150w self contained Solar Light. Includes electrical pipe bracket and remote. For use with B&R Pole and Base system: Bracket SOL-B is Required. Power: 150w IP65 Charging time: 4-6hrs Working time:10-15 hours Working mode: light induction & remote
Learn More
$337.00
+Shipping
Bracket holds up to 2 – 100lb Propane tanks, but can adjust down to hold smaller tanks. (BLOCK NOT INCLUDED) Add this Propane Tank/Cylinder Bracket kit to any Block And Roll® Block to safely store tanks and keep them from tipping over on hard surfaces that can’t be penetrated with a stake. Bracket can also […]
Learn More
$19.95
+Shipping
Tent Location Markout flags are perfect to let dig-safe know where your proposed staking will be (White is the color for Proposed excavation) and for your Tent Crew to know installation location. Markout flags have lines to write in name of tent, size and date to keep in the ground so landscapers do not remove. […]
Learn More