B&R’s T-Deck puller adapter is a back saver for your installation crew. Use to pull flooring decks into place without bending over.
Dimensions: 20.50″
Total measurement when inserted to T-Deck tool: 48.5″
Pull tip: 6″ long
Pull tip: 3/8″ diameter
Use with our T-Deck Tool Stand Up Flooring Tool
California Prop 65 | WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
$32.95
+Shipping
Flat Blade Key Adapter for T-Deck Tool Blade is 2.5″ wide and 3/16″ thick with relief in the middle. Includes spring pin for storing on T-deck tool. T-Deck Tool not included.
Learn More
$44.99 $39.99
+Shipping
One piece Socket Bit T-Deck Tool. 5/16″. This is not compatible with our 1/2″ socket drive. Includes pin.
Learn More
$14.99
+Shipping
Socket Bit for 1/2″ drive T-Deck Tool. 5/16″
Learn More
$14.99
+Shipping
Socket Bit for 1/2″ drive T-Deck Tool. 1/4″
Learn More
$139.00
+Shipping
B&R’s T-Deck Tool is a back saver for your installation crew. Includes 1/2″ drive socket adapter. (BITS SOLD SEPARATELY) Socket bits can store in the main shaft along with the 1/2″ drive adapter. Socket bits are field replaceable from most hardware stores. Choose between a variety of bits for all different kinds of flooring locks. […]
Learn More
$44.99
+Shipping
COMMING SOON! Replacement Socket Adapter with 1/2″ drive (T-Deck tool not included) includes bail pin.
Learn More
$14.99
+Shipping
Socket Bit for 1/2″ drive T-Deck Tool. 3/16″
Learn More
$29.99 $24.99
+Shipping
Introducing the Propane Heater/Equipment Regulator Protector Cap Propane equipment failures are a common headache, especially with portable and rental heaters and cooking gear. The culprit? Regulator issues, primarily caused by clogs and leaks in the connections. Often, these regulators endure rough treatment on job sites, dragged through dirt, grass, and debris, which wears down the […]
Learn More
$229.00
+Shipping
100w self contained Solar Light. Includes Universal pipe bracket, truss clamp and remote. Pole stand not included. To use with B&R pole and base system use: Lighting truss clamp (requires drilling hole) (included) Power: 100w IP65 🔋【LIGHT CONTROL & REMOTE CONTROL】The solar power street light has built-in light control and automatically adjusts the light […]
Learn More
$195.00
+Shipping
COMING SOON! J-Hook adapter works with our pole and base system and allows you to hang a Chandelier or hanging light Available in silver. Pole and base not included. Can be wired with lamp cord with detachable connections for hiding wire (not included) Hole will need to be drilled into pole upright. Not included. […]
Learn More
$44.99
+Shipping
The E-track linen hanger is designed for hangers to be hooked to the cross bar. With this great design, you can hang just about anything you can think of. The bracket has been weight tested to hold 300 lbs; more than enough to hold your apparel or linens. Designed to hold the heaviest of linens, […]
Learn MoreOur 4C Clamp can be used with lighting, fans , Fire Extinguishers and more. Clamp fits most round tent poles up to 4″ OD. 50 lbs. Weight Limit (Does Not Apply to Overhead Rigging) Will fit larger tent poles like Anchor Industries® F3™ Frame tents and most manufactures Tension tent side poles up to 4″ […]
Learn More
$329.00
+Shipping
150w self contained Solar Light. Includes electrical pipe bracket and remote. For use with B&R Pole and Base system: Bracket SOL-B is Required. Power: 150w IP65 Charging time: 4-6hrs Working time:10-15 hours Working mode: light induction & remote
Learn More